R1

Spring-return mechanical diaphragm dosing pump

Technical Features

  • Flow-rate range: 5.5 – 500 l/h, up to 16 bar
  • Wetted parts: SS316L, PVC, PP, PVDF, PTFE, FPM, EPDM and ceramic
  • The D1 pump offers multiple combinations of pump head motors, stroke lengths and materials that allows operators the chance to select the optimal combination appropriate to the specific application.
  • This membrane pump represents an absolutely safe and leak-free solution, to be used wherever chemical leaks typical of some plunger piston pumps are not acceptable.
  • To change the flow rate of the pump, the stroke length can be adjusted manually with a knob or even automatically by servo-motor input 4-20mA.
  • Titan Series D1 pumps can be supplied with a single or three-phase electric motor with IP55 protection, as well as with a DC motor working at 12 Vdc range that allows the pump to achieve flow rates between 23 and 620 l/h at pressure up to 16 bar.
Download Techsheet

D1 HF

Spring-return diaphragm pump with assisted vacuum system®

Technical Features

  • Flow rate range: 450 – 1,200 l/h, up to 4.5 bar
  • Wetted parts: SS316L, PVC, PP, PVDF, PTFE, FPM, EPDM and ceramic
  • D1 HF is fitted with Mytho’s AVS (Assisted Vacuum System®), a technical solution that helps overcome the typical functional limitations of pumps with a spring return. Using this mechanism allows pump performance to be improved by allowing dosing frequency to be raised (stroke/min) without compromising diaphragm lifespan.
  • AVS enables D1 HF to reach a flow rate of 1,200 l/h while keeping noise and mechanical stress at a reduced level. Each model can be configured with two different stroke rates and is supplied with a three-phase 2-pole electric motor with IP55 protection.
Download Techsheet

D1

Spring-return plunger piston dosing pump

Technical Features

  • Flow rate range: 1.5 – 304 l/h, up to 20 bar
  • Wetted parts: SS316L, PVC, PTFE, FPM, EPDM and ceramic
  • The R1 pump is designed for applications that require lower flow rates than the R2 while offering multiple combinations of pump head, motor power and piston stroke length. This achieves multiple hydraulic characteristics for adapting to a large number of applications.
  • Like R2, each model can be configured with two different stroke rates and is available with 3-phase or single-phase motors, both with IP55 protection.
  • Versions with a 12 Vdc motor are available that achieve flow rates between 34 and 350 l/h at pressure up to 20 bar.
Download Techsheet

R2

Spring-return plunger piston dosing pump

Technical Features

  • Flow rate range: 40 – 1,000 l/h, up to 20 bar 
• Wetted parts: SS316L, PVC, PTFE, FPM, EPDM and ceramic
  • The R2 piston dosing pump offers multiple combinations of pump head, motor power and stroke lengths that enable it to be arranged in several hydraulic configurations, making the system compatible with multiple applications.
  • Mytho’s R2 piston dosing pumps can adapt to a large number of applications. Like other variants in the R Series, R2 has a spring-return mechanism in a robust aluminium housing but is equipped with a special pump body specifically recommended for high-pressure applications that allows it to dose with backpressures up to 100 bar.
  • R2 pumps are available with a 3-phase or a single-phase electric motor, both with IP55 protection.
Download Techsheet

R2 HP

Spring plunger piston dosing pump for high pressure

Technical Features

  • Flow rate range: 2.5 – 12 l/h, up to 100 bar
  • Wetted parts: SS316L, PTFE, NBR 
• Mytho’s R2 HP high-pressure piston dosing pumps can adapt to a large number of applications. Like other variants in the R Series, R2 HP has a spring-return mechanism in a robust aluminium housing but is equipped with a special pump body specifically recommended for high-pressure applications that allow it to dose with backpressures up to 100 bar.
  • This model has two stroke rates, with stroke lengths manually settable via a knob. To achieve the given performance, these pumps need to be actuated by a 3-phase motor, provided with an IP55 ingress protection classification.
  • R2 HP has been designed for use in processes requiring an economical and practical solution for dosing small amounts of product at high pressure up to 100 bar, such as boiler applications.
Download Techsheet

V Series

Mytho brings IoT to mechanical chemical dosing

Mytho has used the power of data on demand and the Internet of Things (IoT) to bring users closer than ever to their systems with V Series, a groundbreaking controller that provides invaluable live and historical data on demand from any location worldwide. Currently available for use with the Titan Series of motor-driven pumps, V Series uses an integrated web server to give water-treatment application managers the power to remotely monitor and adjust key pump parameters such as chemical dosage and flow rate 24/7 via PC, laptop, tablet or smartphone. This round-the-clock connectivity offers vast potential for precise digital dosing, process optimisation and cost control in multiple applications.

Download Techsheet

NX N Series

Technical Features

  • Flow rate range: 9 – 530 l/h, up to 12 bar
  • Wetted parts: SS316L, PVDF, PTFE, FPM, EPDM and ceramic
  • Featuring characteristics and functions very similar to those of the NY models, the NX systems of the N Series range have smaller dimensions and can be used effectively where the required flow rates are lower, but it is necessary to work at slightly higher pressures. In fact, these pumps can handle flow rates of up to 530 l/h and can work at pressures up to 12 bar.

NY N Series

Technical Features

  • Flow rate range: 80 – 2,300 l/h, up to 10 bar
  • Wetted parts: SS316L, PVDF, PTFE, FPM, EPDM and ceramic
  • Among the N Series pump range, the NY series pumps provide superior dosing performance, making them suitable for the most demanding applications. Constructed in hard-wearing metal with a cast-aluminium housing, N Series NY can handle the largest output with flow rates as high as 2,300 l/h, at pressures up to 10 bar.
Download Techsheet